CameraMachine/python/temp.py

from mcu.anheng_scale import AnhengScale
import time
from mcu.one_data_set_control import OneDataSet

if __name__ == "__main__":
    onseData = OneDataSet(None)
    result = onseData.create_command_list()
    print('result', result)
    # scale = AnhengScale(baudrate=9600)
    #
    # # 1.列出所有串口，找到你的COM口
    # ports = scale.get_all_com_ports()
    # print("可用串口列表：")
    # for item in ports:
    #     print("item info ", item)
    #     print(f"device:{item['device']}  desc:{item['desc']}")
    # if not ports:
    #     print("没有找到可用串口")
    #     exit()
    # # 2.填入你的串口，例如 COM3
    # com_port = "COM3"
    # ok = scale.connect(com_port)
    # if not ok:
    #     print("串口打开失败，请检查接线与COM号")
    # else:
    #     print(f"已连接 {com_port}")
    #     try:
    #         while True:
    #             data = scale.get_latest()
    #             print(
    #                 f"稳定:{data['stable']} |模式:{data['mode']} |原始g:{data['raw_grams']:.2f} |去皮后g:{data['net_grams']:.2f}")
    #
    #             # 示例：按条件软件去皮（需要秤稳定）
    #             # res = scale.software_tare()
    #             # if res:
    #             #     print("软件去皮成功")
    #
    #             # scale.hardware_tare() #硬件去皮，秤要设COMMOD=5
    #             # scale.hardware_zero() #硬件归零
    #
    #             time.sleep(0.5)
    #     except KeyboardInterrupt:
    #         print("程序退出")
    #     finally:
    #         scale.disconnect()